MV cable accessories · 5–35 kV

Medium-voltage cable accessories

Elbows, terminations & splices, fit to spec

CED Rubber Goods stocks separable connectors, terminations, splices and lugs for 5–35 kV underground distribution. Tell us the cable and we’ll build the bill of material, part by part.

Build a bill of material See our lines

Example build

Sample
25 kVins. OD 1.120″500 kcmil AL stranded600A deadbreak
Catalog no.DescriptionFitStock
K656BLR15/25 kV 600A T-body w/ test point25 kVStock
655CAJ600A cable adapter0.980–1.180Stock
03700-330600A connector, 500 str/comp500Stock
K650BIP15/25 kV 600A insulating plug w/ cap25 kVStock
Elastimold parts shown as an example. Run your own cable in the Product Selector.

About us

Finally a distributor that can speak your language

CED Rubber Goods is an electrical distributor focused solely on underground accessories that connect, terminate and splice medium-voltage power cable. Utilities, electrical contractors and industrial maintenance teams come to us when they need the right elbow or kit for the cable in front of them.

With significant inventory on the shelf, partnerships with all the big name manufacturers, and a highly specialized sales team, we can speak the language, clarify technical questions, reduce lead times, and ensure the right material hits the jobsite every time.

Try our product selector tool to help identify the exact parts you need on-site, and take the finger-crossing out of procurement.

What we supply

Products

Deadbreak elbows

600A · 5–35 kV

T-bodies, cable adapters, compression connectors, insulating plugs, junctions and bushing extenders.

Loadbreak elbows

200A · 15–25 kV

Elbow housings, copper-top connectors, bushing inserts, feed-thrus, protective caps and junctions.

Terminations

Indoor · Outdoor

Cold shrink and heat shrink termination kits, with shield adapter kits for concentric neutral and tape shield cable.

Splices

Cold · Heat shrink

Inline splice kits sized by insulation diameter and conductor, with the connector called out on the BOM.

Lugs & connectors

Compression

Lugs and butt splices to finish terminations and splices, matched to conductor size and material.

How we work

Quoted to fit

Matched by interfaceElbow parts are quoted by the bushing they mount to, so a higher-rated part from the wrong interface never lands on your order.
Fit shown, not assumedEach line shows the part’s published range next to your cable, so you can see how much margin is left.
One manufacturer per buildA bill of material stays within one line wherever the parts exist, so components mate the way they were tested.